

1 / 6
Emotiva XPA-3 Gen3, Three channel power amplifier
درهم 6,300
تفاصيل السلعة
العمر
6 - 12 شهر
الحالة
ممتازة من الداخل والخارج
ضمان
نعم
مدى الإستخدام
بدون التغليف الأصلي لكن تم الاستخدام مرة واحدة
تم النشر بتاريخ: 11 يوليو 2026
الوصف
As good as brand new. Open box. Used a few days. Excellent working condition. Power supply between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).
Packed in original factory box. Power cord/12volt trigger cable/manual included.
Reason for selling: Shifting to a small apartment.
Deliverable to Abudhabi/Dubai
Serious buyers please WhatsApp to or
The XPA-3 Gen3 is a three-channel audiophile quality power amplifier, and is perfect for powering the three important front channels of a 5.1 channel, 7.1 channel, or Dolby Atmos / DTS:X home theater system.
Each channel uses a fully discrete Class A/B amplifier module for smooth, detailed sound, while our high-efficiency switch-mode power supply and Optimized Class H topology help deliver serious headroom without the bulk of an oversized traditional design. In real terms, that means more control when the soundtrack gets demanding.
The XPA-3 Gen3 connects to an AV processor, stereo preamp, or an AV receiver with preamp outputs. With balanced XLR and unbalanced RCA inputs on each channel, it is easy to add to an existing system without rebuilding your whole rack.
A heavy-duty chassis, intelligent fault protection and trigger support make this an amplifier built for the long haul.
Power Output
300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven;
550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven;
300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven;
490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven;
275 watts RMS/channel; THD<0.1%; 8 Ohms; ALL THREE channels driven;
450 watts RMS/channel; THD<0.1%; 4 Ohms; ALL THREE channels driven.
Technical specifications:
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB);
Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB;
Signal to Noise Ratio (8 Ohm load): > 117 dB; ref FTC rated power; unbalanced input (A-weighted). > 91 dB; ref 1 watt; unbalanced input (A-weighted);
Minimum Recommended Load Impedance (per channel): 4 Ohms (one 4 Ohm load or two paralleled 8 Ohm loads);
Input Sensitivity (for rated power; 8 Ohm load): 1.71 V;
Gain: 29 dB;
Input Impedance: 33 kOhms (balanced) / 23.5 kOhms (unbalanced);
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required;
Trigger Output: 12 VDC; can drive any load up to 120 mA;
Power Requirements: Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).
Specifications
Series -Emotiva X
Color-Black
Damping factor > 500 (8 Ohm load)
Gain channels 3
Maximum frequency, Hz 80000
Minimum frequency, Hz 5
Signal-to-noise ratio, dB
> 117
THD (Total Harmonic Distorsions), %
< 0.005 (at 100 watts RMS; 1 kHz; 8 Ohms)
Inputs
RCA line inputs 3
Analog XLR inputs 3
Power
Power consumption, W
1400 (max.)
Power per channel (4 ohm), W
450
Power per channel (8 ohm), W
275
Dimensions
Weight, kg
17.7
Height, mm
203.2 (including feet)
Depth, mm
482.6
Width, mm
431.8
Packed in original factory box. Power cord/12volt trigger cable/manual included.
Reason for selling: Shifting to a small apartment.
Deliverable to Abudhabi/Dubai
Serious buyers please WhatsApp to or
The XPA-3 Gen3 is a three-channel audiophile quality power amplifier, and is perfect for powering the three important front channels of a 5.1 channel, 7.1 channel, or Dolby Atmos / DTS:X home theater system.
Each channel uses a fully discrete Class A/B amplifier module for smooth, detailed sound, while our high-efficiency switch-mode power supply and Optimized Class H topology help deliver serious headroom without the bulk of an oversized traditional design. In real terms, that means more control when the soundtrack gets demanding.
The XPA-3 Gen3 connects to an AV processor, stereo preamp, or an AV receiver with preamp outputs. With balanced XLR and unbalanced RCA inputs on each channel, it is easy to add to an existing system without rebuilding your whole rack.
A heavy-duty chassis, intelligent fault protection and trigger support make this an amplifier built for the long haul.
Power Output
300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven;
550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven;
300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven;
490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven;
275 watts RMS/channel; THD<0.1%; 8 Ohms; ALL THREE channels driven;
450 watts RMS/channel; THD<0.1%; 4 Ohms; ALL THREE channels driven.
Technical specifications:
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB);
Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB;
Signal to Noise Ratio (8 Ohm load): > 117 dB; ref FTC rated power; unbalanced input (A-weighted). > 91 dB; ref 1 watt; unbalanced input (A-weighted);
Minimum Recommended Load Impedance (per channel): 4 Ohms (one 4 Ohm load or two paralleled 8 Ohm loads);
Input Sensitivity (for rated power; 8 Ohm load): 1.71 V;
Gain: 29 dB;
Input Impedance: 33 kOhms (balanced) / 23.5 kOhms (unbalanced);
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required;
Trigger Output: 12 VDC; can drive any load up to 120 mA;
Power Requirements: Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).
Specifications
Series -Emotiva X
Color-Black
Damping factor > 500 (8 Ohm load)
Gain channels 3
Maximum frequency, Hz 80000
Minimum frequency, Hz 5
Signal-to-noise ratio, dB
> 117
THD (Total Harmonic Distorsions), %
< 0.005 (at 100 watts RMS; 1 kHz; 8 Ohms)
Inputs
RCA line inputs 3
Analog XLR inputs 3
Power
Power consumption, W
1400 (max.)
Power per channel (4 ohm), W
450
Power per channel (8 ohm), W
275
Dimensions
Weight, kg
17.7
Height, mm
203.2 (including feet)
Depth, mm
482.6
Width, mm
431.8
منطقة
بين الجسرين, أبو ظبي, الإمارات
- المحاسبة / المالية
- السيارات
- الصحة والجمال
- التنظيف /التدبير المنزلي
- الإنشاءات
- شيف / طباخ
- خدمة العملاء / مركز الإتصال
- إدارة وتحليل البيانات
- التصميم
- سائق / توصيل
- تعليم
- هندسة
- إدارة الفعاليات والمناسبات
- عامل / فنّي
- الموارد البشرية - الإدارة
- تكنولوجيا المعلومات
- خدمات قانونية
- خدمات لوجستية و توزيع
- التصنيع / التخزين
- كابتن بحري / بحار
- التسويق/الإعلان
- الاعلام,الفنون والترفيه
- الطب / الرعاية الصحية
- عقارات
- تشغيل المطاعم
- المبيعات / تطوير الأعمال
- السكرتارية / المكتب الأمامي
- الأمن /الحماية
- رياضة و لياقة
- السفروالضيافة
- أخرى
- يبحث عن عمل
English